Psion Homepage Logo.

Bar Code Interface Wiring Connections for the Psion Organiser II
Top Slot (D).

Bar code reader PCB Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10 Vo Bar Code Data
Pin 11
Pin 12 Vcc Power Supply +5 Volts
Pin 13 GND Ground

None of the other pins are connected though pins 1 and 2 can also be used as the ground as they are connected to pin 13 by the same circuit.

Top Slot (D) Index page

Psion bar.

The information in this data sheet is accepted for use entirely at your own risk. The Psion Organiser II team will not be held responsible in any way for your use of this information.

These pages should be viewed using Netscape 4.03 or Microsoft Internet Explorer 3.02 at 800x600 pixels.
Left arrow Comms Link Interface ~ Homepage ~ Magnetic Card Reader Right arrow