|
Dual Bar Code Reader / Comms
Link Wiring Connections for the
Psion Organiser II Top Slot (D).
 |
Pin 1 | GND | Ground |
| Pin 2 | GND | Ground | |
| Pin 3 | DSR | Data Set Ready | |
| Pin 4 | DTR | Data Terminal Ready | |
| Pin 5 | RTS | Request to Send | |
| Pin 6 | CLS | Clear to Send | |
| Pin 7 | TxD | Transmit Data | |
| Pin 8 | RxD | Receive Data | |
| Pin 9 | |||
| Pin 10 | Vo | Bar Code Data | |
| Pin 11 | |||
| Pin 12 | Vcc | Power Supply +5 Volts | |
| Pin 13 | GND | Ground |
(Bar Code Reader connections are in Red.)
The information in this data sheet is accepted for use entirely at your own risk. The Psion Organiser II team will not be held responsible in any way for your use of this information.
| These pages should be viewed using Netscape 4.03 or Microsoft Internet Explorer 3.02 at 800x600 pixels. | ||||
 |
Magnetic Card Reader | ~ Homepage ~ | Mag Card / Comms Link |  |