|
Comms Link Wiring Connections
for the Psion Organiser II
Top Slot (D) Interface.
 |
Pin 1 | GND | Ground |
| Pin 2 | GND | Ground | |
| Pin 3 | DSR | Data Set Ready (Comms Link) | |
| Pin 4 | DTR | Data Terminal Ready (Comms Link) | |
| Pin 5 | RTS | Request To Send (Comms Link) | |
| Pin 6 | CTS | Clear To Send (Comms Link) | |
| Pin 7 | TxD | Transmit Data (Comms Link) | |
| Pin 8 | RxD | Receive Data (Comms Link) | |
| Pin 9 | |||
| Pin 10 | |||
| Pin 11 | |||
| Pin 12 | |||
| Pin 13 | GND | Ground |
The rest of the pins are not used but pin 13 can be used for a ground. The Ground Pins 1 and 2 and Pin 13 are all linked together on the same Circuit and thus are interchangeable.
The information in this data sheet is accepted for use entirely at your own risk. The Psion Organiser II team will not be held responsible in any way for your use of this information.
| These pages should be viewed using Netscape 4.03 or Microsoft Internet Explorer 3.02 at 800x600 pixels. | ||||
 |
General Top Slot Wiring | ~ Homepage ~ | Bar Code Interface Wiring |  |